Danh mục sản phẩm
- MÁY HÚT BỤI DEPURECO
- Máy hút bui 1 pha
- Máy hút bụi 3 pha
- Máy hút bụi 3 pha công suất lớn
- Máy hút bụi đạt tiêu chuẩn ATEX
- Máy hút bụi mạt sắt, dầu dùng cho máy gia công (Oil & Swarf)
- Hệ thống hút bụi trung tâm
- Máy thu gom bụi công nghiệp lưu lượng khí
- Máy hút bụi khói hàn
- Máy hút bụi dùng trong ngành chế biến thực phẩm, dược phẩm
- Máy hút bụi sử dụng khí nén
- Máy hút bụi đặc biệt
- MÁY HÚT BỤI CÔNG NGHIỆP
- MÁY HÚT BỤI DÂN DỤNG
- MÁY VỆ SINH CÔNG NGHIỆP
- MÁY CHÀ SÀN CÔNG NGHIỆP
- MÁY CHÀ SÀN LIÊN HỢP
- XE QUÉT THU GOM RÁC
- MÁY HÚT BỤI CHUYÊN DỤNG
AS Series A
Mã Sản phẩm :
Giá: Liên hệ
Thêm vào giỏHotline tư vấn : 0904868034 (Mr.Nam) Hoặc 0983598368 ( Mr Bình), 086 8886 903 (Mr Được)
The AS Series A vacuum is the definitive solution for vacuuming paper, textile and plastic trimmings for the packaging industry and many others. Model: AS 085 Model: AS 150 Model: AS 220
AS 085 | 150 | 220
TECHNICAL DATA |
||||
AS |
Units |
085 |
150 |
220 |
Type |
Side channel blower |
|||
Power |
kW - HP |
0,85 - 1,14 |
1,6 - 2,2 |
2,2 – 3 |
Voltage | Frequency |
V | Hz |
400 | 50/60 |
400 | 50/60 |
400 | 50/60 |
IP | Insulation class |
55 | F |
55 | F |
55 | F |
|
Maximum vacuum |
mBar |
210 |
230 |
250 |
Vacuum in continuous run |
mBar |
160 |
190 |
210 |
Maximum air flow |
m³/h |
150 |
280 |
320 |
Relief valve |
Included |
|||
Inlet |
Ø mm |
50 |
50 |
50 / 70 |
Noise level – (EN ISO 3744) |
dB(A) |
64 |
64 |
64 |
Bin capacity |
Lt |
120 |
120 |
120 |
Dimensions |
mm |
510 X 590 |
510 X 590 |
600 X 500 |
Height |
mm |
1370 |
1370 |
1400 |
Weight |
Kg |
58 |
66 |
70 |
The suction unit is a side channel blower with direct coupling between motor and impeller. The side channel blower is equipped with a safety valve to guarantee continued work in complete safety, without any maintenance. The blower is also equipped with a metal silencer to maintain a low noise level.

A polyester bag filter is placed inside the bin in order to collect the vacuumed material which goes through the inlet and falls directly into the bag. In the meantime, air continues to go through the filter's fabric without interruption. This system collects the material on the very bottom of the bag thus allowing the collection of a big quantity of material. A grid is placed at the base of the chamber to protect the blower.

The inlet, whose angle facilitates the falling of the material directly towards the bottom of the bag, is positioned on the vacuum's lid. Upon request different inlet diameters are available and there's also the possibility to install a second one.

AS vacuum cleaners are equipped with an inspection window which gives the possibility to check the quantity of material inside the bin without opening the lid.
