Danh mục sản phẩm
- MÁY HÚT BỤI DEPURECO
- Máy hút bui 1 pha
- Máy hút bụi 3 pha
- Máy hút bụi 3 pha công suất lớn
- Máy hút bụi đạt tiêu chuẩn ATEX
- Máy hút bụi mạt sắt, dầu dùng cho máy gia công (Oil & Swarf)
- Hệ thống hút bụi trung tâm
- Máy thu gom bụi công nghiệp lưu lượng khí
- Máy hút bụi khói hàn
- Máy hút bụi dùng trong ngành chế biến thực phẩm, dược phẩm
- Máy hút bụi sử dụng khí nén
- Máy hút bụi đặc biệt
- MÁY HÚT BỤI CÔNG NGHIỆP
- MÁY HÚT BỤI DÂN DỤNG
- MÁY VỆ SINH CÔNG NGHIỆP
- MÁY CHÀ SÀN CÔNG NGHIỆP
- MÁY CHÀ SÀN LIÊN HỢP
- XE QUÉT THU GOM RÁC
- MÁY HÚT BỤI CHUYÊN DỤNG
Máy hút bụi khói hàn 1 pha -1,3 kW. Model: WELD ONE
Mã Sản phẩm : WELD ONE
Giá: Liên hệ
Thêm vào giỏHotline tư vấn : 0904868034 (Mr.Nam) Hoặc 0983598368 ( Mr Bình), 086 8886 903 (Mr Được)
Máy hút khói nhỏ gọn dùng cho mỏ hàn có điều khiển từ xa từ máy hàn.
TECHNICAL DATA
|
|||
Units |
WELD ONE |
WELD TWO |
|
Motors| Type |
1 | By-Pass |
2 | By-Pass |
|
Power |
kW-HP |
1,3 – 1,7 |
2,6 – 3,5 |
Voltage | Frequency |
V | Hz |
230 | 50/60 |
230 | 50/60 |
Maximum vacuum |
mBar |
250 |
250 |
Maximum air flow |
m³/h |
190 |
380 |
Inlet |
Ø mm |
40 |
2x40 |
Noiselevel– (EN ISO 3744) |
dB(A) |
72 |
72 |
Dimensions |
mm |
300 x 300 |
300 x 300 |
Height |
mm |
720 |
720 |
Weight |
Kg |
25 |
28 |
Primaryfilter |
|||
Type |
Cartridge |
Cartridge |
|
Surfacearea |
cm² |
30.000 |
30.000 |
(Class EN 603335-2-69) |
M Class |
M Class |
|
Media |
Cellulose |
Cellulose |
The vacuum is generated by 1 or 2 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance. The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
Thanks to the air flow regulator it is possible to increase or decrease the airflow of your welding torch.
A sturdy cellulose cartridge enables the capturing and the filtration of welding fumes guaranteeing the efficient protection of the operator's health.
A sensor installed on one side of the unit enables the operator to control the machine directly from the welding unit. Passing the cable in the clip will make it so that when the welding starts the vacuum cleaner will start at the same time.
Sản phẩm liên quan